FA-8 | FA-14 | FA-48 | FFA-5 | FFA-8 | FFA-30 | FTA-101 | LCA-4 | LCA-4LV | LCA-9 | LCA-14 | LCA-20 | LCA-48A | LCA-50 | LCA-127 | C 20/20 | LCA-24 | CI-2 | CI-3 | CI-6 | CI-9
FA-8
Adhesive FA-8 is an unfilled epoxy adhesive that has good dimensional stability. It is useful in applications for bonding and sealing aluminum and other metals. The Activator BA-5 is colored making it easy to tell when the adhesive is properly mixed.
Resin: 92308
Activator: 97005
Freeze Pak: 98308
FA-14
Adhesive FA-14 is a very low viscosity unfilled epoxy resin used for bonding components made from fused beryllium oxide, ceramics and other metals. It is also useful for other bonding and impregnating applications that require an excellent wetting compound. Adhesive FA-14 is suitable for gyro use in contact with poly(bromotrifluoroethylene) oil.
Resin: 92314
Activator: 97045
Freeze Pak: 98314
FA-48
Adhesive FA-48 is an epoxy resin system that has unusually good high temperature resistance, even if cured at only 212°F. This premium system, based on over two years of intense development, is useful in applications up to 360°F for continuous use and up to 400° or 450°F intermittently. The high strength and low modulus indicate unusually high toughness for such a high temperature material. This system meets Bacon Industries’ requirements for lack of condensible volatiles and for gyro fluid resistance after a cure of 2 hours at 212°F plus 2 hours at 376°F and is “gyro grade”. This is a clear unfilled system and may be considered as a potential replacement for Adhesive FA-8 where superior performance at temperatures above 175°F is required. A filled low coefficient of thermal expansion version of this system, Adhesive LCA-48A, is available.
Resin: 92348
Activator: 97109
Freeze Pak: 98348
FFA-5
Bacon Industries’ FFA Series are flexible fluid adhesives which distribute stresses developed in bonded joints because of impact or coefficient of expansion-induced stresses. These are not gyro-grade adhesives. FFA-5 is a flexible general purpose adhesive.
TDS 2405 Coming Soon |
Resin: 92405
Activator: 97015
Freeze Pak: 98405
FFA-8
Adhesive FFA-8 is a clear fluid epoxy-polyamide system for use as an adhesive or for potting. It has a long pot life at room temperature, good resistance to mechanical shock and has high strength if heat-cured. For medical applications, it meets the requirements of USP XXIII, Class VI-50oC/72 hours (ethylene oxide) Testing for Plastics.
Resin: 92408
Activator: 97015
Freeze Pak: 98408
FFA-30
Adhesive FFA-30 is a low viscosity modified epoxy-polyamide system featuring excellent wetting of various substrates. Because the resin component has an epoxide functionality greater than two, the cured properties are superior to the more commonly used epoxy-polyamide systems. Adhesive FFA-30 is useful in applications requiring wick bonding of magnetic lamination stacks and for cementing a wide variety of materials.
Resin: 92430
Activator: 97094
Freeze Pak: 98430
FTA-101
Adhesive FTA-101 a modified epoxy adhesive whose flexibility may be varied with different activator ratios. Because of its paste-like consistency, it does not run from vertical surfaces. It is useful as a general purpose adhesive for application to a wide variety of substrates.
Resin: 92901
Activator: 97161
Freeze Pak: 99279
LCA-4
Adhesive LCA-4 is a highly filled epoxy adhesive that has a low coefficient of thermal expansion, good dimensional stability, and excellent chemical resistance. It is proving useful in applications requiring bonding or hermetic sealing of metal, ceramic, glass and other substrates.
Resin: 92504
Activator: 97005
Freeze Pak: 98504
LCA-4LV
Adhesive LCA-4LV is a highly-filled gyro grade epoxy adhesive having a low coefficient of thermal expansion, good dimensional stability and excellent chemical resistance. It is useful in applications requiring bonding or hermetic sealing of metal, ceramic, glass and other substrates. Compared to Adhesive LCA-4, Adhesive LCA-4LV is less viscous, has a longer working life and generally requires additional cure time to develop similar properties.
Resin: 92504L
Activator: 97005
Freeze Pak: 98504L
LCA-9
Adhesive LCA-9 is a filled epoxy adhesive having an exceptionally low coefficient of thermal expansion. It exhibits excellent adhesion to aluminum and beryllium and has good chemical resistance.
Resin: 92509
Activator: 97005
Freeze Pak: 98509
LCA-14
Adhesive LCA-14 is a filled epoxy resin adhesive having outstanding resistance to temperatures up to 400oF and low coefficient of thermal expansion.
TDS 2514 Coming Soon |
Resin: N/A
Activator: N/A
Freeze Pak: 98514
LCA-20
Adhesive LCA-20 is a filled gyro grade adhesive having a low coefficient of thermal expansion and low outgassing. It exhibits excellent adhesion to aluminum, glass and other difficult to bond substrates.
TDS 2520 Coming Soon |
Resin: 92520
Activator: 97040A
Freeze Pak: 98520
LCA-48A
Adhesive LCA-48A, an epoxy resin system, has unusually good high temperature resistance, a low coefficient of thermal expansion and outstanding solvent resistance, even if cured at only 212°F. This premium system, based on over two years of intense development, is useful in applications involving exposure to temperatures up to 450°F and to harsh environments. It may be considered as a potential replacement for LCA-4, LCA-4LV and LCA-9 where superior performance at temperatures above 200°F is required.
Resin: 92548A
Activator: 97105
Freeze Pak: 98548A
LCA-50
Adhesive LCA-50 is a thermally conductive, electrically insulating epoxy adhesive. It exhibits excellent adhesion to aluminum and many hard to bond substrates. It also has good chemical resistance including gyro fluids.
Resin: 92550
Activator: 97009
Freeze Pak:
LCA-127
Adhesive LCA-127 is a thermally conductive, electrically insulating epoxy adhesive. It has a paste consistency and will not run from vertical surfaces.
Resin: 92627
Activator: 97049
Freeze Pak: 98527
Conducting 20/20
Bacon Industries offers silver-filled epoxy adhesives for making electrical connections in applications where the high temperatures necessary to make soldered connections are detrimental to components. Because these materials are filled with silver, they also have relatively high thermal conductivity. Conducting 20/20 is an electrically conductive, silver filled epoxy with a low viscosity at room temperature. Conducting 20/20 is the most fluid of the two systems, being self-leveling at room temperature and therefore, easiest to apply.
Resin: 92620CN
Activator: 97066B
Freeze Pak:
LCA-24
Bacon Industries offers silver-filled epoxy adhesives for making electrical connections in applications where the high temperatures necessary to make soldered connections are detrimental to components. Because these materials are filled with silver, they also have relatively high thermal conductivity. Adhesive LCA-24 is an excellent all-around system with a low coefficient of thermal expansion, better strength above 160°F, and superior long-term conductivity stability.
Resin: 92524
Activator: 97009
Freeze Pak: 98524
Coil Impregnant 2 (CI-2) (Freeze-Pak Only)
Bacon Industries’ Coil Impregnants are unfilled, low viscosity, two-part compounds. Their prime application is the impregnation of electronic components containing a high percentage of fine wires where complete penetration and freedom from voids is important. These compounds are also useful for casting and coating applications where a low viscosity material is required. Adhesive CI-2 is the preferred material unless the shorter work life or cure cycle of CI-3, or the longer work life of CI-6 or CI-9 is desired.
TDS 1071 Coming Soon |
Resin: N/A
Activator: N/A
Freeze Pak: 98112
Coil Impregnant 3 (CI-3)
Bacon Industries’ Coil Impregnants are unfilled, low viscosity, two-part compounds. Their prime application is the impregnation of electronic components containing a high percentage of fine wires where complete penetration and freedom from voids is important. These compounds are also useful for casting and coating applications where a low viscosity material is required. Adhesive CI-3 is a pure epoxy compound and has the shortest work life and cure cycle.
TDS 1071 Coming Soon |
Resin: 91073
Activator: 97004
Freeze Pak: 98102
Coil Impregnant 6 (CI-6)
Bacon Industries’ Coil Impregnants are unfilled, low viscosity, two-part compounds. Their prime application is the impregnation of electronic components containing a high percentage of fine wires where complete penetration and freedom from voids is important. These compounds are also useful for casting and coating applications where a low viscosity material is required. Adhesive CI-6 is a pure epoxy compound that features a long work life and low viscosity.
Resin: 91076
Activator: 97045
Freeze Pak: 98106
Coil Impregnant 9 (CI-9)
Bacon Industries’ Coil Impregnants are unfilled, low viscosity, two-part compounds. Their prime application is the impregnation of electronic components containing a high percentage of fine wires where complete penetration and freedom from voids is important. These compounds are also useful for casting and coating applications where a low viscosity material is required. Adhesive CI-9 is a pure epoxy compound that has the longest work life of the coil impregnants offered at Bacon Industries.
TDS 1071 Coming Soon |
Resin: 91079
Activator: 97182
Freeze Pak: N/A